Source: Ningbo Eagle Intelligent Technology Co., Ltd
1, side pull the base
The most suitable for high-speed transmission of heavy-duty electronic components drive source direction improved, the magnetic effect to achieve the highest full-wave half-wave frequency adjustment to use, vibration shrapnel angle of 15 °
2, is pulling the base
Good versatility, low speed is good. Unique top design, making the disc to the type of low sensitivity assembly debugging simple
3, piezoelectric drive chassis
Shrapnel does not need to be adjusted;
The vibration transmission speed allows a large amplitude range to adjust the vibration;
Vibration transmission is very stable;
Use does not produce magnetic interference;
Most used in the clear, thin, short. Small parts transmission;
Dedicated controller 110V / 220V can be shared.
4, precision small amplitude feeder
100 ~ 180HZ high vibration and 0.6mm small amplitude feeder to adapt to the movable frame 10mm below the tiny precision thin workpiece, the diameter of 80 ~ 150mm to achieve high reliability of the workpiece for feeding.
Recommended products Keywords: Cixi vibration plate Ningbo vibration plate non-standard vibration plate |
Record: ICP.17021542
