As a fully automated machine, the automatic assembly machine is used by many companies. Does it have any parts that are easy to wear during daily use? Xiaobian tells you that there is one. Let me give you a brief explanation. : The worn parts are mainly the batch head and the suction nozzle. The batch head wears the fastest, mainly because the material is often contacted, and the rotation between the material and the material is generated. Therefore, the metal powder is stuck for a long time, and the solution is also very The simple and complicated is to clean and replace at regular intervals. The second is the nozzle, of course, because of the long time of use, the solution is the same as the batch. Most of these two parts are customized according to the manufacturer's requirements. When replacing the screws, remember to contact the seller to replace the batch head and nozzle. When using the automatic assembly machine, be sure to read the instruction manual carefully to avoid safety problems. Automatic assembly machine advantage: 1. Reduce the cost of employment, reduce management costs and work injury risks, and ensure the quality of products. 2. There will be no material waste and too loose or too tight, these have corresponding adjustments. |
Record: ICP.17021542
